Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Anand Narwani
About
- Username
- Anand Narwani
- Joined
- Visits
- 4
- Last Active
- Roles
- Member
Comments
-
Hi Adam,Help! I'm stuck. The lights were ostensibly taken at Gain 5 and I have tested with 5, 6 and 9. 5 and 6 do not calibrate out the amp glow. 9 causes large sections in the area to have a K value of 0. Visually comparing my lights to the maste…
-
Hi Adam,I uploaded a Zip file to the link with the raw data. I'm starting to suspect that I have the gain setting not matched with the darks and lights. I could not remember what I set it to on the evening I took the lights, so I looked in the Fit…
-
I used pixel math to do a subtraction of the master dark from a raw light frame and I think there is still amp glow in the resulting image. It's really hard to tell because the K values of the pixels in the area are only slightly higher than other …
-
Adam,I've re-run WBPP this morning from scratch. Here's a link to the screen shots, logs, output master files and a sample of raw and calibrated light frames. I'm going to tinker with pixel math to see if I can understand its odd interface. Anand